My Learnings from FTC
In my journey, in FTC I learned many things and came across many different challenges. I had to overcome all of these challenges and I learnt a lot in the process. One of the major things that I learnt was 3d designing. Before I had some minor knowledge of using Fusion 360 but I learnt a lot more during this competition. As the only 3d Designer in the team I had to design many of the major parts we needed for the competition. Here are a few of the things that I designed. Battery Holder To hold the battery to our robot, we needed a holder to store it and help us attach it to the robot. To start, I took the battery measurements by the scale and created a sketch to be the base, then extruded the walls and the base. I made a slot for the wire of the battery to be able to come out. With the rough design of the battery holder down, I started the refinement of the build and filleted down all the sharp edges. However, if I were to re-design this part, I could count this step as a mistake as